Safety Shell / E-Catalogue / OCQ-1
Workwear Division

OCQ-1

Multi-Risk FR Coverall

A high-performance multi-risk protective coverall for demanding oil and gas environments — flame and heat protection, antistatic performance and resistance to light chemical splashes in a single rip-stop shell.

255 g/m² Rip-Stop construction Para-Aramid reinforced EN ISO 11612
Explore the coverall Full specifications
OCQ-1 coverall under direct flame during a flame resistance and weave test
PROTECTION / 01

Heat and Flame Shield

Modacrylic and para-aramid give OCQ-1 inherent flame resistance — the protection is in the fibre, not in a finish that washes out. Certified to EN ISO 11612 for limited flame spread, convective, radiant and contact heat.

  • Designed to withstand 260°C for five minutes without ignition, melting or delamination
  • EN ISO 11612 classification A1, A2, B1, C1, E3 and F1
  • Flame-retardant HT reflective tape
Macro detail of the OCQ-1 rip-stop weave with reinforcement grid
CONSTRUCTION / 02

Rip-Stop Reinforcement

The rip-stop grid interlaces reinforcement threads at regular intervals, so a puncture stays a puncture instead of becoming a tear. Para-aramid fibres add strength and thermal performance where the fabric works hardest.

  • Rip-stop construction resists tearing and propagation of damage
  • Para-aramid reinforcement for strength and thermal performance
  • Additional reinforcement at knees, seat, lower legs and wrists
OCQ-1 coverall with electrostatic discharge dissipating across the fabric
ANTISTATIC / 03

Electrostatic Dissipation

Carbon antistatic fibres woven through the fabric structure dissipate electrostatic charge instead of letting it accumulate — the difference that matters on a site where a single spark is the hazard.

  • Carbon antistatic fibres integrated into the fabric
  • Meets EN 1149-5 antistatic requirements
  • Reduced risk from electrostatic charge accumulation
Product Specification

Material specifications

Fabric weight255 g/m²
Composition55% Modacrylic / 32% Cotton / 7% FR Polyamide / 5% Para-Aramid / 1% Carbon Antistatic
Fabric constructionRip-stop
Fabric width150 ± 2 cm
Primary applicationHeat, flame and multi-risk protective clothing
Protective propertiesFlame-resistant, antistatic and multi-risk
EN ISO 11612 classA1, A2, B1, C1, E3, F1
Download spec sheet (PDF)

Why multi-risk?

Real industrial hazards rarely arrive one at a time. OCQ-1 combines inherent flame resistance, para-aramid reinforcement, antistatic fibres and chemical splash resistance in one garment, so a single coverall covers the combination instead of forcing a compromise.

✓ OEKO-TEX® STANDARD 100

Certified performance

EN ISO 11612 — Protection against heat and flame
EN ISO 11611 Class 1 — Welding and allied processes
EN 1149-5 — Antistatic protective clothing
EN 13034 — Protection against light chemical splashes
EN ISO 20471 — High-visibility protective clothing
EN ISO 15384 — Wildland firefighting protective clothing
EN 469 — Structural firefighting
OEKO-TEX® STANDARD 100 — Tested for harmful substances

Equip your team with OCQ-1

Custom colors, sizes and branding available · contact@safety-shell.com · +40 741 604 960

Request an offer